Compact 110 V Aquarium Canister Filter and Hose Kit

A compact ABS canister, external pump and connecting pipework make up this aquarium filter kit. Coarse, medium and thin sponge layers sit inside the barrel, with space above and below for additional media. Two hoses connect the inlet and return, and an inlet adjuster controls the flow setting.

The system is rated for 110 volts at 60 hertz, with a 6-watt pump and a nominal flow of 105.7 US gallons per hour. Maximum pumping height is 33.5 inches. It is intended for 28-gallon freshwater or seawater aquariums; compare the tank arrangement and equipment space before planning the installation.

The canister body is 8.9 inches high and 6.2 inches across. Each hose is 59.1 inches long, with a 0.47-inch inner diameter and 0.63-inch outside diameter. Plan the hose route and pipe positions before assembly, then follow the manual when making the connections and starting the filter.

Disconnect power before opening the canister or servicing the pump. Remove debris from the intake and return, clean the sponge layers following the manual and inspect the seal and hose fittings. Check the completed connections for leaks when restarting the system.