Auto-Close Dog Gate with Cat Door for 29 to 31.5 Inch Openings

This black steel gate stands 29.9 in (76 cm) tall and adjusts to fit openings from 29.1 to 31.5 in (74 to 80 cm) wide, using the four adjusting screws that come with it. It suits doorways, hallways and the entrances to stairs, and a built-in small door lets a cat pass through while a dog stays on the other side.

The main door is 17.7 in (45 cm) wide and swings both ways, or you can set it to swing in only one direction with the rotatable locks. It closes on its own when it is swung between 30 and 90 degrees, stays open past 90 degrees, and will not self-close below 30 degrees. A double-lock system works with one hand: slide both ends together, then lift. The tubes sit 2.2 in (5.5 cm) apart, and the small cat door measures 6.3 in wide by 10 in high (16 x 25.5 cm).

The gate is made for dogs with a shoulder height between 9.8 and 19.7 in (25 to 50 cm), so measure your dog first. At the top of stairs, use expansion screws to mount it, since a secure fit matters there. After installing, tighten both sides until the gap at the door lock is 2 to 3 mm; a larger gap is normal before installation. Assembly is easy, and the box includes the screws, double-sided tape rounds and a manual. Wipe the steel with a damp cloth.