41-Inch Black Dog Gate with Walk-Through and Small Pet Door

Divide an indoor doorway with a black 41-inch gate that offers two different openings. The main walk-through door swings in either direction, while a small rectangular pet door sits low in the same panel. A sliding top control and lifting action operate the main door, with an additional lower locking point.

Choose the installation location by the opening width: this gate fits 29–31.5 inches. The 26.8-inch frame width is measured without the adjustment screws and is not the installation range. Main-door clearance is 19.7 inches, and the small pet opening measures 6.3 inches wide by 10.2 inches high. The vertical bars are spaced 2 inches apart. Our gate-with-door guide covers the measurements to compare before choosing a doorway gate.

The door's closing behavior depends on its angle. It returns toward closed from an opening between 15 and 90 degrees, stays open beyond 90 degrees and does not close automatically below 15 degrees. Check the lock after passing through rather than relying only on the closing motion. Follow the assembly instructions to install the four adjustment screws and supplied mounting components, then check the fit and both door locks regularly. Wipe the steel and plastic surfaces clean and dry them after cleaning.