XL Gray Mesh Pet Cot with Center Frame Supports

A broad gray mesh panel stretches across the frame of this XL pet cot, creating an open resting surface without bolsters or a canopy. Steel tubing surrounds the platform, and additional supports beneath the center distinguish its frame from a cot supported only at the four corners. The raised layout leaves open space below the mesh.

Overall dimensions are approximately 48 × 35.8 × 9.1 inches (122 × 91 × 23 cm), including the frame. These outside measurements are different from a separate usable sleeping-area measurement. Compare your pet’s resting posture with the available platform, allowing for the surrounding tubes. The total weight capacity is 132 pounds (60 kg); this is a combined limit, rather than an allowance for each pet on the cot.

We chose the open mesh platform and center-supported structure for a raised resting setup with room to stretch. Assemble the side frames and lower supports, then check every connection before use on level ground. Remove hair and surface debris regularly, spot-clean marks and wipe the frame. Let all parts dry fully and check the mesh, seams and joints before your pet returns to the cot.